Showing posts with label What is design for print?. Show all posts
Showing posts with label What is design for print?. Show all posts

Saturday, 19 November 2011

Good Is//Design Production for Print//Printers in Leeds.


Researching specific printers in Leeds that could provide the services for my specific print outcomes for the 'Good Is' project- the hypothetical Wes Anderson Film Festival at The Hyde Park Picture House (more information and work can be found on my Design Practice blog).
Looking for printers in Leeds- not only due to it being the 4th largest industry in the city, but also because of the location of the Picture House itself- a close proximity to the printers would allow a good working relationship and ease of contact/visit, as well as keeping delivery costs to a minimum- something that the Picture House, being an independent body (and supported by Leeds City Council) would certainly look for within their printed media. 


Also blogging ideal choices of stock and ability to print with them- how I would, given more time/finances have chosen to use in my final printed outcomes.

LIST OF [FINAL] OUTCOMES:

- 48 sheet billboard advertising
- 6 sheet bus shell advertising
- 4 sheet train station advertising
- Mailshot presentation box
- Mailshot slip cover
- Hotdog film booklets
- 320mmx320mm pocket map
- Belly binds 
- Mailshot Film Festival Booklet

*Choice of stock to be kept [reasonably] consistent with other promotional print materials- both for outdoor advertising and mailshot delivery. 


OUTCOME: 48 SHEET BILLBOARD ADVERTISING
STOCK: 120GSM BULKY NEWSPRINT/CARTIDGE
PRINT METHOD: DIGITAL (LOW QUANTITY PRINT)
NUMBER OF UNITS: 1x48 SHEET


Great information from Redcliffe printers- use 120gsm blue backed stock for their billboard prints- and give a wide variety of prices and quotes available dependent on size requirements- as well as giving advice on the resolution and file size of images, etc.
Unfortunately not a Leeds-based company, but Bristol obviously still within the UK- and for minimal orders (cost effectiveness of printing and advertising would be kept low to ensure that profits were still gained by The Picture House) the delivery costs would also be kept low.

More billboard printers:


OUTCOME: 6 SHEET BUS SHELL ADVERTISING
STOCK: 120GSM BULKY OFF-WHITE NEWSPRINT [KEPT COVERED IN PLASTIC SEALED PANEL- WEATHER PROOF]
PRINT METHOD: DIGITAL
NUMBER OF UNITS: 3


OUTCOME: 4 SHEET TRAIN STATION ADVERTISING
STOCK: 120GSM BULKY OFF-WHITE NEWSPRINT [KEPT COVERED IN PLASTIC SEALED PANEL- WEATHER PROOF]
PRINT METHOD: DIGITAL
NUMBER OF UNITS: 3

[INFORMATION RELEVANT TO BOTH FORMS OF ADVERTISING]



http://www.colourcopyleeds.co.uk/


Colour copy Leeds are local, economical and boast a low carbon footprint- works well in keeping for the The Picture House unique and independent. art house ethos- digital print suppliers are reasonably easy to source within Leeds- see more information below.



Offer high-end as well as budget prints- suited for the Hyde Park Picture House budget and limited print run... few examples below- obviously not ideal stock, but this would, I'm sure, be negotiable.



Local, well-established printers- specialising in both digital and Litho print- the two forms of print that would be used in my design outcomes.



Local printers, boasting high-end design- as well as a range of print methods and finishes all under one roof (and company)- a rarity in contemporary professional print. Range of formats, scales and stocks vary greatly, and, of course, can produce a wide variety of spot colours- up to two in a single print run (none of my outcomes have more than one spot colour per design).
Printing such a minimal amount of designs at a company like Team, however, would be costly in such a high-end environment- much more suited to mailshot promotional material as opposed to the outdoor advertising.



Although specialising in more difficult-to-print substrates and materials, such as plastics, acetates, etc, they also provided a standard digital and litho print service- again, with local credentials- thus, keeping costs to a minimum.


http://www.duffieldprinters.co.uk/ 

Again, a local print company (which one third of the Graphic Design BA group visited on our recent printer trips)- well-established, long running company- reliable, environmental (FSC certification), etc.

OUTCOME: MAILSHOT PRESENTATION BOX
STOCK: 200GSM REINFORCED CARTRIDGE
PRINT METHOD: LITHOGRAPHIC
NUMBER OF UNITS: APPROX 771





A reinforced cartridge paper- to still provide the tactile texture and off-white colouring- more "indie" and art house in it's aesthetic and print outcome than a pure white, but still able to withstand postal delivery without too great a risk of damage.

OUTCOME: MAILSHOT SLIP COVER
STOCK: 140GSM OFF WHITE CARTRIDGE
PRINT METHOD: LITHOGRAPHIC
NUMBER OF UNITS: APPROX 771




As previously mentioned, local, high-end design printers- having visited Team print during this design module, I was able to see their print production methods- and learn more about their in-house print finishing (a rarity to offer all stages of print under one company)- not only could they print the design, but they could also die cut and emboss the packaging for finish. 


OUTCOME: HOTDOG FILM BOOKLETS
STOCK: 140GSM OFF WHITE CARTRIDGE
PRINT METHOD: LITHOGRAPHIC
NUMBER OF UNITS: APPROX 771 [x6 (ONE PER FILM- SEPERATE SPOT COLOURS/PRINT RUNS)= 4,626]

Minimal pages within the hotdog booklet- want to keep the same tactile texture but still reinforced (mid weight cartridge stock) to ensure that poster can be securely unfolded and stuck onto wall if the recipient requires/wants. **

OUTCOME: BELLY BINDS
STOCK: 140GSM OFF WHITE CARTRIDGE
PRINT METHOD: LITHOGRAPHIC
NUMBER OF UNITS: APPROX 5397 [ 771 x6 (ONE PER FILM- SEPERATE SPOT COLOURS/PRINT RUNS)= 4,626] PLUS 1 PER MAP DESIGN (4626 + 771= 5397)
OUTCOME: 320x320MM POCKET MAP
STOCK: 140GSM OFF WHITE CARTRIDGE
PRINT METHOD: LITHOGRAPHIC
NUMBER OF UNITS: APPROX 771


** See details above- needed to be kept rigid and flat when unfolded- easy to read and use for attendees of the Film Festival- potentially on the move.
 
OUTCOME: MAILSHOT FILM FESTIVAL BOOKLET
STOCK: 50GSM OFF WHITE/IVORY BIBLE PAPER (contents)
PRINT METHOD: LITHOGRAPHIC
NUMBER OF UNITS: APPROX 771

Unusual, one-off stock in the series helps to ensure that the booklet is regarded as the "stand out" piece within the mailshot delivery pack- considered, tactile, delicate- still works within the series of other stocks, yet remains a single information and persuasive source of printed promotional design in it's own right.


-SEE LIST OF PRINTERS ABOVE FOR POSSIBLE CONTACTS FOR PROFESSIONAL PRINT WITHIN LEEDS & THE UK-

* I would have liked to have had the opportunity to experiment with more printing methods in accordance to varying print outcomes, however, time and concept restrictions has held me back from being able to see this through. Other print examples including: RISO, Flexography, Gravure, etc.

Wednesday, 16 November 2011

What Is Design For Print?//Risography & Mimeography.


Stumbled upon two new printing methods today which seem really unique and fascinating. Throughout this module, I feel like I have learnt a great deal (and I hope it has been reflected!) and feel confident that I would like to pursue more print as I move on and push my design practice and professional development within my work.

RISOGRAPHY

Risograph is a high-speed digital printing system manufactured by the Riso Kagaku Corporation and designed mainly for high-volume photocopying and printing. Increasingly, Risograph machines have been commonly referred to as a RISO Printer-Duplicator, due to their common usage as a network printer as well as a stand-alone duplicator. When printing or copying multiple quantities (generally more than 20) of the same original, it is typically far less expensive per page than a conventional photocopier, laser printer, or inkjet printer. Printing historian Rick O'Connor has debated that the original, and thus correct, name for the device is RISSO and not RISO. This debate spawns from the notion that an extra 'S' is added because the inventor's wife found it more pleasing to the ears.

How a Risograph works

The underlying technology is very similar to a mimeograph. It brings together several processes which were previously carried out manually, for example using the Riso Print Gocco system or the Gestetner system.
The original is scanned through the machine and a master is created, by means of tiny heat spots on a thermal plate burning voids (corresponding to image areas) in a master sheet. This master is then wrapped around a drum and ink is forced through the voids in the master. The paper runs flat through the machine while the drum rotates at high speed to create each image on the paper.
This simple technology is highly reliable compared to a standard photocopier and can achieve both very high speeds (typically 130 pages per minute) and very low costs. A good lifespan for a risograph might involve making 100,000 masters and 5,000,000 copies.
The key master-making thermal head component is manufactured by Toshiba. Similar machines to Risographs are manufactured by Ricoh, Gestetner, Rex Rotary and Nashuatec. All these other brands are now owned by Ricoh.
Because the process involves real ink - like offset printing - and does not require heat to fix the image on the paper - like a photocopier or laser printer - the output from a risograph can be treated like any printed material. This means that sheets which have been through a risograph may happily go through a laser printer afterwards and vice-versa.
For schools, clubs, colleges, political campaigns and other short run print jobs, the Risograph bridges the gap between a standard photocopier (which is cheaper up to about 50 copies) and using a commercial printer (cheaper over about 10,000 copies).
Risographs have typically had interchangeable colour inks and drums allowing for printing in different colours or using spot colour in one print job. The Riso MZ series models have two ink drums allowing two colours to be printed in one pass.

MIMEOGRAPHY
http://en.wikipedia.org/wiki/Mimeograph

The stencil duplicator or mimeograph machine (often abbreviated to mimeo) is a low-cost printing press that works by forcing ink through a stencil onto paper.
Along with spirit duplicators and hectographs, mimeographs were for many decades used to print short-run office work, classroom materials, and church bulletins. They also were critical to the development of early fanzines because their low cost and availability enabled publication of amateur writings. These technologies began to be supplanted by photocopying and cheap offset printing in the late 1960s.
Although in mid-range quantities, mimeographs remain more economical and energy-efficient, easier-to-use photocopying and offset printing have replaced mimeography almost entirely in developed countries. Mimeograph machines continue to be used in developing countries because it is a simple, cheap, and robust technology. Many mimeographs can be hand-cranked, and thus require no electricity.

Origins

Thomas Edison received US patent 180,857 for "Autographic Printing" on August 8, 1876. The patent covered the electric pen, used for making the stencil, and the flatbed duplicating press. In 1880 Edison obtained a further patent, US 224,665: "Method of Preparing Autographic Stencils for Printing", which covered the making of stencils using a file plate, a grooved metal plate on which the stencil was placed which perforated the stencil when written on with a blunt metal stylus.
The word "mimeograph" was first used by Albert Blake Dick when he licensed Edison's patents in 1887.
Dick received Trademark Registration no. 0356815 for the term "Mimeograph" in the U.S. Patent Office. It is currently listed as a dead entry, but shows the A.B. Dick Company of Chicago as the owner of the name.
Over time, the term became generic and is now an example of a genericized trademark. ("Roneograph," also "Roneo machine," was another trademark used for mimeograph machines, the name being a contraction of Rotary Neostyle)
Others who worked concurrently on the development of stencil duplicating were Eugenio de Zaccato and David Gestetner, both in Britain. In Britain the machines were most often referred to as "duplicators", though the predominance of Gestetner and Roneo in the UK market meant that some people referred to the machine by one of those two manufacturers' names.
In 1891, Gestetner patented his Automatic Cyclostyle. This was one of the first rotary machines that retained the flatbed, which passed back and forth under inked rollers. This invention provided for more automated, faster reproductions since the pages were produced and moved by rollers instead of pressing one single sheet at a time.
By 1900, two primary types of mimeographs had come into use: a single-drum machine and a dual drum machine. The single-drum machine used a single drum for ink transfer to the stencil and the dual-drum machine used two drums and silk-screens to transfer the ink to the stencils. The single drum (example Roneo) machine could be easily used for multi color work by changing the drum - each of which contained ink of a different color. This was spot color for mastheads. Colors could not be mixed.
The mimeograph became popular because it was much cheaper than traditional print - there was no typesetting or skilled labor involved. One individual with a typewriter and the necessary equipment essentially became his own printing factory, which allowed for greater circulation of printed material.

Mimeography process

The image transfer medium is a stencil made from waxed mulberry paper. This flexible waxed sheet is backed by a sheet of stiff card stock, with the sheets bound at the top.
Once prepared, the stencil is wrapped around the ink-filled drum of the rotary machine. When a blank sheet of paper is drawn between the rotating drum and a pressure roller, ink is forced through the holes on the stencil onto the paper. Early flatbed machines used a kind of squeegee.

Preparing stencils

For printed copy, a stencil assemblage is placed in a typewriter. The typewriter ribbon has to be disabled so that the bare, sharp type element strikes the stencil directly. The impact of the type element displaces the wax, making the tissue paper permeable to the oil-based ink. This is called "cutting a stencil."
A variety of specialized styluses were used on the stencil to render lettering, illustrations, or other artistic features by hand against a textured plastic backing plate.
Mistakes can be corrected by brushing them out with a specially formulated correction fluid, and retyping once it has dried. ("Obliterine" was a popular brand of correction fluid in Australia and the United Kingdom.)
Stencils were also made with a thermal process, an infrared method similar to that used by early photocopiers. The common machine was called a Thermofax.
Another device, called an electrostencil machine, sometimes was used to make mimeo stencils from a typed or printed original. It worked by scanning the original on a rotating drum with a moving optical head and burning through the blank stencil with an electric spark in the places where the optical head detected ink. It was slow and filled the air with ozone and text produced from electrostencils was of lower resolution than that produced by typed stencils, although the process was good for reproducing illustrations. A skilled mimeo operator using an electrostencil and a very coarse halftone screen could make acceptable printed copies of a photograph.
During the declining years of the mimeograph, some people made stencils with early computers and dot-matrix impact printers.

Limitations

Unlike spirit duplicators (where the only ink available is depleted from the master image), mimeograph technology works by forcing a replenishable supply of ink through the stencil master. In theory, the mimeograph process could be continued indefinitely, especially if a durable stencil master were used (e.g. a thin metal foil). In practice, most low-cost mimeo stencils gradually wear out over the course of producing several hundred copies. Typically the stencil deteriorates gradually, producing a characteristic degraded image quality until the stencil tears, abruptly ending the print run. If further copies are desired at this point, there is no choice but to make up another stencil from scratch.
Often, the stencil material covering the interiors of closed letterforms (e.g. "a", "b", "d", "e", "g", etc.) would fall away during continued printing, causing ink-filled letters in the resulting copies. The stencil would gradually stretch, starting near the top where the mechanical forces were greatest, causing a characteristic "mid-line sag" in the textual lines of the copies, that would progress until the stencil failed completely. The Gestetner Company (and others) devised various methods to make mimeo stencils last longer in use.
Compared to spirit duplication, mimeography produced a darker, more legible image. Spirit duplicated images were usually tinted a light purple or lavender. which gradually became lighter and fainter in color over the course of some dozens of copies. Mimeography was often considered "the next step up" in quality, capable of producing hundreds of copies. Print runs beyond that level were usually produced by professional printers, or as the technology became available, xerographic copiers.

Contemporary use

Gestetner, Risograph, and other companies still make and sell highly automated mimeograph-like machines that are externally similar to photocopiers. The modern version of a mimeograph, called a digital duplicator, or copyprinter, contains a scanner, a thermal head for stencil cutting, and a large roll of stencil material entirely inside the unit. It makes the stencils and mounts and unmounts them from the print drum automatically, making it almost as easy to operate as a photocopier. The Risograph is the best known of these machines.

Uses and art

Mimeographs and the closely related but distinctly different spirit duplicator process were both used extensively in schools to copy homework assignments and tests. They were also commonly used for low-budget amateur publishing, including club newsletters and church bulletins. They were especially popular with science fiction fans, who used them extensively in the production of fanzines in the middle 20th century, before photocopying became inexpensive.
Letters and typographical symbols were sometimes used to create illustrations, in a precursor to ASCII art. Because changing ink color in a mimeograph could be a laborious process, involving extensively cleaning the machine or, on newer models, replacing the drum or rollers, and then running the paper through the machine a second time, some fanzine publishers experimented with techniques for painting several colors on the pad, notably Shelby Vick, who created a kind of plaid "Vicolor."

What Is Design for Print?//ISSUU print manual.


Another embedded version of my final ISSUU top ten print manual, which can also be found on my Design Practice blog.
Again, as evaluated on my design practice blog, I really would have loved the opportunity to go back and re-design this publication, to add more content and make it look a little more eye-catching/varied than it already is. However, I hope that this manual, combined with my research throughout the module for the What Is Design for Print? project will be substantial enough to warrant a good grade/feedback for my efforts.

Sunday, 6 November 2011

What Is Design for Print?//Monochrome/Duotone/Spot Colours


Researching informaiton on the specifics (and definitions) of monochrome, duotone, and spot colours for content for my 'What Is Design for Print?' ISSUU- based print handbook publication. All information, combined with my own knowledge from this design module shall be utilised, and written in my own words for the final design outcome. All developments and design of the publication can be found on my Design Practice blog in the forthcoming weeks.

MONOCHROME

http://www.google.co.uk/search?q=coated+stock&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a#hl=en&client=firefox-a&rls=org.mozilla:en-US:official&q=monochrome&tbs=dfn:1&tbo=u&sa=X&ei=dXC2TtuiKsPb8APOpsSRBQ&ved=0CB4QkQ4&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=1da6cd0f7d6083af&biw=1280&bih=577

mon·o·chrome
adjective /ˈmänəˌkrōm/ 
  1. (of a photograph or picture, or a television screen) Consisting of or displaying images in black and white or in varying tones of only one color

  2. Lacking variety and interest; insipid
    • - the monochrome circuit of traveling Broadway productions

noun /ˈmänəˌkrōm/ 
monochromes, plural
  1. A photograph or picture developed or executed in black and white or in varying tones of only one color

  2. Representation or reproduction in black and white or in varying tones of only one color
Monochrome

Monochrome describes paintings, drawings, design, or photographs in one color or shades of one color. A monochromatic object or image has colors in shades of limited colors or hues. Images using only shades of grey (with or without black and/or white) are called grayscale or black-and-white. However, scientifically speaking, "Monochromatic light" refers to light of a narrow frequency.

Application

For an image, the term monochrome is usually taken to mean the same as black and white or, more likely, grayscale, but may also be used to refer to other combinations containing only tones of a single color, such as green-and-white or green-and-black. It may also refer to sepia displaying tones from light tan to dark brown or cyanotype (“blueprint”) images, and early photographic methods such as daguerreotypes, ambrotypes, and tintypes, each of which may be used to produce a monochromatic image.
In computing, monochrome has two meanings:
  • it may mean having only one color which is either on or off,
  • allowing shades of that color, although this is more correctly known as grayscale.
A monochrome computer display is able to display only a single color, often green, amber, red or white, and often also shades of that color.
In film photography, monochrome is typically the use of black-and-white film. Originally, all photography was done in monochrome until the invention of color film plates in the early 20th century.

In digital photography, monochrome is the capture of only shades of black by the sensor, or by post-processing a color image to present only the perceived brightness by combining the values of multiple channels (usually red, blue, and green). The weighting of individual channels may be selected to achieve a desired artistic effect – if only the red channel is selected by the weighting then the effect will be similar to that of using a red filter on panchromatic film. If the red channel is eliminated and the green and blue combined then the effect will be similar to that of Orthochromatic film or the use of a cyan filter on panchromatic film. The selection of weighting thus allows a wide range of artistic expression in the final monochromatic image.
For production of an anaglyph image the original color stereogram source may first be reduced to monochrome in order to simplify the rendering of the image. This is sometimes required in cases where a color image would render in a confusing manner given the colors and patterns present in the source image and the selection filters used (typically red and its complement cyan).

Theory

In physics, monochromatic refers to electromagnetic radiation of a single frequency. In the physical sense, no source of electromagnetic radiation is purely monochromatic, since that would require a wave of infinite duration as a consequence of the Fourier transform's localization property (cf. spectral coherence). Even very controlled sources such as lasers operate in a range of frequencies (known as the spectral linewidth). In practice, filtered light, diffraction grating separated light and laser light are all routinely referred to as monochromatic. Often light sources can be compared and one be labeled as “more monochromatic” (in a similar usage as monodispersity). And a device which isolates light sources of a narrow bandwidth are called monochromators, even though the bandwidth is often explicitly specified, and thus a collection of frequencies is understood.

DUOTONE


du·o·tone
noun /ˈd(y)o͞oəˌtōn/ 
duotones, plural
  1. A halftone illustration made from a single original with two different colors at different screen angles

  2. The technique or process of making such illustrations
    • - the best images that duotone can produce
    •  
    •  

http://en.wikipedia.org/wiki/Duotone

Duotone

Duotone is a halftone reproduction of an image using the superimposition of one contrasting color halftone (traditionally black) over another color halftone. This is most often used to bring out middle tones and highlights of an image. The most common colors used are blue, yellow, browns and reds.
Now due to recent advances in technology, duotones, tritones, and quadtones can be easily created using image manipulation programs.

History

Duotones hail from Cyanotype and halftone prints. Color images in newspapers and comic books are usually halftone prints and occasionally duotones.

Modern use

Duotone color mode in Adobe's Photoshop uses an imaging process that computes the highlights and middle tones in a black and white image then allows the user to choose any color ink as the second color.

Fake Duotone

A fake duotone, or duograph, is done by printing a single color with a one color halftone over it. This process is generally not preferred over a regular duotone as it loses much of the contrast of the image.


SPOT COLOURS


Web definitions
  • In offset printing, a spot color is any color generated by an ink (pure or mixed) that is printed using a single run.

  • (Spot Colours) Refers to solid colours which are found in commercially obtainable colour ranges such as Pantone®, these are mostly used in addition to CMYK where CMYK is not available e.g. Printing gold or silver. ...

  • The technique of colouring for emphasis some areas of basic black-and-white advertisements, usually with a single colour.

  • Ink colour(s) other than black, used as a highlight or attention-getter
 

Spot color

In offset printing, a spot color is any color generated by an ink (pure or mixed) that is printed using a single run.
The widely spread offset-printing process is composed of four spot colors: Cyan, Magenta, Yellow, and Key (black) commonly referred to as CMYK. More advanced processes involve the use of six spot colors (hexachromatic process), which add Orange and Green to the process (termed CMYKOG). The two additional spot colors are added to compensate for the ineffective reproduction of faint tints using CMYK colors only. However, offset technicians around the world use the term spot color to mean any color generated by a non-standard offset ink; such as metallic, fluorescent, spot varnish, or custom hand-mixed inks.
When making a multi-color print with a spot color process, every spot color needs its own lithographic film. All the areas of the same spot color are printed using the same film, hence, using the same lithographic plate. The dot gain, hence the screen angle and line frequency, of a spot color vary according to its intended purpose. Spot lamination and UV coatings are sometimes referred to as 'spot colors', as they share the characteristics of requiring a separate lithographic film and print run.

Computer methods

There are various methods to incorporate rather sophisticated patterns of spot colors in the final prepress artwork. Software applications such as Adobe InDesign, Adobe Illustrator, CorelDRAW, QuarkXPress and Scribus may generate spot colors as additional channels. Adobe Photoshop can also be used to generate soft edges (widely known as feathered edges) of spot colors. The dissolve effect provided by Adobe Photoshop layer patterns can be generated for any spot color.

Optimizing usage

Generally the cost and potential for problems for a print job increase as one adds more spot colors, due to the increased cost and complexity of added process inks and films, and requiring more runs per finished print. However, spot colors can be a very powerful weapon in security printing, like money, passports, bonds, and other similar prints that should be hard to forge. Money printing for example, uses secret formulae of spot colors, some of which can be seen by the naked eye, and some cannot be seen unless by using special lights, or by applying certain chemicals.

Digitization

Spot colors are now a great business for a company like Pantone. The modern trend in spot color matching systems is the digitization of spot colors. This idea came from the fact that a spot color print won't be a match to the monitor's colors, due to the inherent differences in printed (ink) colors and monitor (light) colors. To achieve a rather good result of simulating the RGB colors into CMYK colors in offset prints, a proper monitor calibration should be done to realize a good balance between reproduction of gray color on paper and on screen.

Classification

Spot color classification has led to thousands of discrete colors being given unique names or numbers. There are several industry standards in the classification of spot color systems, such as:
  • Pantone, the dominant spot color printing system in the United States and Europe.
  • Toyo, a common spot color system in Japan.
  • DIC, another common Japanese spot color system.
  • ANPA, a palette of 300 colors specified by the American Newspaper Publishers Association for spot color usage in newspapers.
  • GCMI, a standard for color used in package printing developed by the Glass Packaging Institute (formerly known as the Glass Container Manufacturers Institute, hence the abbreviation).
  • HKS is a color system which contains 120 spot colors and 3250 tones for coated and uncoated paper. HKS is an abbreviation of three German color manufacturers: Hostmann-Steinberg Druckfarben, Kast + Ehinger Druckfarben and H. Schmincke & Co.
Because each color system creates their own colors from scratch, spot colors from one system may be impossible to find within the library of another.

What Is Design for Print?//Stock (gsm, coated, uncoated, etc).


Researching informaiton on varying types of stock for content for my 'What Is Design for Print?' ISSUU- based print handbook publication. All information, combined with my own knowledge from this design module shall be utilised, and written in my own words for the final design outcome. All developments and design of the publication can be found on my Design Practice blog in the forthcoming weeks.

WEIGHT//PAPER DENSITY

http://en.wikipedia.org/wiki/Paper

Paper is a thin material mainly used for writing upon, printing upon, drawing or for packaging. It is produced by pressing together moist fibers, typically cellulose pulp derived from wood, rags or grasses, and drying them into flexible sheets.
Paper is a versatile material with many uses. Whilst the most common is for writing and printing upon, it is also widely used as a packaging material, in many cleaning products, in a number of industrial and construction processes, and even as a food ingredient – particularly in Asian cultures.
Paper, and the pulp papermaking process, was said to be developed in China during the early 2nd century AD by the Han court eunuch Cai Lun, although the earliest archaeological fragments of paper derive from the 2nd century BC in China.

History

The oldest known archaeological fragments of the immediate precursor to modern paper date to 2nd century BC China. Papermaking is considered one of the Four Great Inventions of China, and the pulp papermaking process is ascribed to Cai Lun, a 2nd century AD Han court eunuch. With paper an effective substitute for silk in many applications, China could export silk in greater quantity, contributing to a Golden Age.
Paper spread from China through the Islamic world to medieval Europe in the 13th century, where the first water-powered paper mills were built. In the 19th century, industrial manufacture greatly lowered its cost, enabling mass exchange of information and contributing to significant cultural shifts. In 1844, Canadian inventor Charles Fenerty and German F.G. Keller independently developed processes for pulping wood fibers.

Etymology

The word "paper" is etymologically derived from papyros, Ancient Greek for the Cyperus papyrus plant. Papyrus is a thick, paper-like material produced from the pith of the Cyperus papyrus plant which was used in ancient Egypt and other Mediterranean cultures for writing before the introduction of paper into the Middle East and Europe. Although paper is etymologically derived from papyrus, the two are produced very differently and the development of modern paper is separate from the development of papyrus. Papyrus is a "lamination of natural plants, while paper is manufactured from fibres whose properties have been changed by maceration or disintegration.

Chemical pulping

The purpose of a chemical pulping process is to break down the chemical structure of lignin and render it soluble in the cooking liquor, so that it may be washed from the cellulose fibers. Because lignin holds the plant cells together, chemical pulping frees the fibres and makes pulp. The pulp can also be bleached to produce white paper for printing, painting and writing. Chemical pulps tend to cost more than mechanical pulps, largely due to the low yield, 40–50% of the original wood. Since the process preserves fibre length, however, chemical pulps tend to make stronger paper. Another advantage of chemical pulping is that the majority of the heat and electricity needed to run the process is produced by burning the lignin removed during pulping.

Paper made from chemical pulps are also known as wood-free papers. Not to be confused with tree-free paper.
The kraft process is the most commonly practiced strategy for pulp manufacturing and produces especially strong, unbleached papers that can be used directly for bags and boxes but are often processed further, e.g. to make corrugated cardboard.

Mechanical pulping

There are two major mechanical pulps, thermo mechanical pulp (TMP) and groundwood pulp (GW). In the TMP process, wood is chipped and then fed into large steam-heated refiners where the chips are squeezed and made into fibres between two steel discs. In the groundwood process, debarked logs are fed into grinders where they are pressed against rotating stones and made into fibres. Mechanical pulping does not remove the lignin, so the yield is very high, >95%, but also causes paper made from this pulp to yellow and become brittle over time. Mechanical pulps have rather short fibre lengths and produce weak paper. Although large amounts of electrical energy are required to produce mechanical pulp, it costs less than chemical pulp.

Deinked pulp

Paper recycling processes can use either chemical or mechanical pulp. By mixing with water and applying mechanical action the hydrogen bonds in the paper can be broken and fibres separated again. Most recycled paper contains a proportion of virgin fibre in the interests of quality. Generally deinked pulp is of the same quality or lower than the collected paper it was made from.
There are three main classifications of recycled fibre:.
  • Mill broke or internal mill waste – this incorporates any substandard or grade-change paper made within the paper mill which then goes back into the manufacturing system to be re-pulped back into paper. Such out-of-specification paper is not sold and is therefore often not classified as genuine reclaimed recycled fibre. However, most paper mills have been recycling their own waste fibre for many years, long before recycling become popular.
  • Preconsumer waste – this is offcuts and processing waste, such as guillotine trims and envelope blank waste. This waste is generated outside the paper mill and could potentially go to landfill, and is a genuine recycled fibre source. Also includes de-inked preconsumer (recycled material that has been printed but did not reach its intended end use, such as waste from printers and unsold publications).
  • Postconsumer waste – this is fibre from paper which has been used for its intended end use and would include office waste, magazine papers and newsprint. As the vast majority of this paper has been printed (either digitally or by more conventional means such as lithography or rotogravure), it will either be recycled as printed paper or go through a deinking process first.
Recycled papers can be made from 100% recycled materials or blended with virgin pulp. They are (generally) not as strong nor as bright as papers made from virgin pulp.

Additives

Besides the fibres, pulps may contain fillers such as chalk or china clay, which improve the characteristics of the paper for printing or writing. Additives for sizing purposes may be mixed into the pulp and/or applied to the paper web later in the manufacturing process. The purpose of sizing is to establish the correct level of surface absorbency to suit the ink or paint.

Producing paper

The pulp is feed to a paper machine where it is formed as a paper web and the water is removed from it by pressing and drying.
Pressing the sheet removes the water by force. Once the water is forced from the sheet, felt (not to be confused with the traditional felt) is used to collect the water. When making paper by hand, a blotter sheet is used.
Drying involves using air and or heat to remove water from the paper sheet. In the earliest days of papermaking this was done by hanging the paper sheets like laundry. In more modern times, various forms of heated drying mechanisms are used. On the paper machine, the most common is the steam-heated can dryer. These dryers can heat to temperatures above 200 °F (93 °C) and are used in long sequences of more than 40 cans. The heat produced by these can easily dry the paper to less than 6% moisture.

Finishing

The paper may then undergo sizing to alter its physical properties for use in various applications.
Paper at this point is uncoated. Coated paper has a thin layer of material such as calcium carbonate or china clay applied to one or both sides in order to create a surface more suitable for high-resolution halftone screens. (Uncoated papers are rarely suitable for screens above 150 lpi.) Coated or uncoated papers may have their surfaces polished by calendering. Coated papers are divided into matte, semi-matte or silk, and gloss. Gloss papers give the highest optical density in the printed image.
The paper is then fed onto reels if it is to be used on web printing presses, or cut into sheets for other printing processes or other purposes. The fibres in the paper basically run in the machine direction. Sheets are usually cut "long-grain", i.e. with the grain parallel to the longer dimension of the sheet.
All paper produced by paper machines as the Fourdrinier Machine are wove paper, i.e. the wire mesh that transports the web leaves a pattern that has the same density along the paper grain and across the grain. Textured finishes, watermarks and wire patterns imitating hand-made laid paper can be created by the use of appropriate rollers in the later stages of the machine.
Wove paper does not exhibit "laidlines", which are small regular lines left behind on paper when it was handmade in a mould made from rows of metal wires or bamboo. Laidlines are very close together. They run perpendicular to the "chainlines", which are further apart. Handmade paper similarly exhibits "deckle edges", or rough and feathery borders.

Applications

Paper can be produced with a wide variety of properties, depending on its intended use.
  • For representing value: paper money, bank note, cheque, security (see security paper), voucher and ticket
  • For storing information: book, notebook, magazine, newspaper, art, zine, letter
  • For personal use: diary, note to remind oneself, etc.; for temporary personal use: scratch paper
  • For communication: between individuals and/or groups of people.
  • For packaging: corrugated box, paper bag, envelope, wrapping tissue, Charta emporetica and wallpaper
  • For cleaning: toilet paper, handkerchiefs, paper towels, facial tissue and cat litter
  • For construction: papier-mâché, origami, paper planes, quilling, paper honeycomb, used as a core material in composite materials, paper engineering, construction paper and paper clothing
  • For other uses: emery paper, sandpaper, blotting paper, litmus paper, universal indicator paper, paper chromatography, electrical insulation paper (see also dielectric and permittivity) and filter paper

Types, thickness and weight

The thickness of paper is often measured by caliper, which is typically given in thousandths of an inch. Paper may be between 0.07 millimetres (0.0028 in) and 0.18 millimetres (0.0071 in) thick.
Paper is often characterized by weight. In the United States, the weight assigned to a paper is the weight of a ream, 500 sheets, of varying "basic sizes", before the paper is cut into the size it is sold to end customers. For example, a ream of 20 lb, 8.5 × 11 in (216 × 279 mm) paper weighs 5 pounds, because it has been cut from a larger sheet into four pieces. In the United States, printing paper is generally 20 lb, 24 lb, or 32 lb at most. Cover stock is generally 68 lb, and 110 lb or more is considered card stock.
In Europe, and other regions using the ISO 216 paper sizing system, the weight is expressed in grammes per square metre (g/m2 or usually just g) of the paper. Printing paper is generally between 60 g and 120 g. Anything heavier than 160 g is considered card. The weight of a ream therefore depends on the dimensions of the paper and its thickness.
Most commercial paper sold in North America is cut to standard paper sizes based on customary units and is defined by the length and width of a sheet of paper.
The ISO 216 system used in most other countries is based on the surface area of a sheet of paper, not on a sheet's width and length. It was first adopted in Germany in 1922 and generally spread as nations adopted the metric system. The largest standard size paper is A0 (A zero), measuring one square meter (approx. 1189x841 mm). Two sheets of A1, placed upright side by side fit exactly into one sheet of A0 laid on its side. Similarly, two sheets of A2 fit into one sheet of A1 and so forth. Common sizes used in the office and the home are A4 and A3 (A3 is the size of two A4 sheets).
The density of paper ranges from 250 kg/m3 (16 lb/cu ft) for tissue paper to 1,500 kg/m3 (94 lb/cu ft) for some speciality paper. Printing paper is about 800 kg/m3 (50 lb/cu ft).
Paper may be classified into seven categories :
  • Printing papers of wide variety.
  • Wrapping papers for the protection of goods and merchandise. This includes wax and kraft papers.
  • Writing paper suitable for stationary requirements. This includes ledger, bank, and bond paper.
  • Blotting papers containing little or no size.
  • Drawing papers usually with rough surfaces used by artists and designers, including cartridge paper.
  • Handmade papers including most decorative papers, Ingres papers, Japanese paper and tissues, all characterized by lack of grain direction.
  • Specialty papers including cigarette paper, toilet tissue, and other industrial papers.
Some paper types include:
  • Bank paper
  • Banana paper
  • Bond paper
  • Book paper
  • Coated paper: glossy and matte surface
  • Construction paper/sugar paper
  • Cotton paper
  • Electronic paper
  • Fish paper (vulcanized fibres for electrical insulation)
  • Inkjet paper
  • Kraft paper
  • Laid paper
  • Leather paper
  • Mummy paper
  • Sandpaper
  • Tyvek paper
  • Wallpaper
  • Washi
  • Waterproof paper
  • Wax paper
  • Wove paper
  • Xuan paper

Paper stability

Much of the early paper made from wood pulp contained significant amounts of alum, a variety of aluminium sulfate salts that are significantly acidic. Alum was added to paper to assist in sizing the paper, making it somewhat water resistant so that inks did not "run" or spread uncontrollably. The early papermakers did not realize that the alum they added liberally to cure almost every problem encountered in making their product would eventually be detrimental. The cellulose fibres which make up paper are hydrolyzed by acid, and the presence of alum would eventually degrade the fibres until the paper disintegrated in a process which has come to be known as "slow fire". Documents written on rag paper were significantly more stable. The use of non-acidic additives to make paper is becoming more prevalent and the stability of these papers is less of an issue.
Paper made from mechanical pulp contains significant amounts of lignin, a major component in wood. In the presence of light and oxygen lignin reacts to give yellow materials, which is why newsprint and other mechanical paper yellows with age. Paper made from bleached kraft or sulfite pulps does not contain significant amounts of lignin and is therefore better suited for books, documents and other applications where whiteness of the paper is essential.
It is important to note that just because a paper is made of wood pulp, does not necessarily mean it is any less durable than a rag paper. The factor that determines the ageing behavior of a paper is how it was manufactured, not the original source of the fibres. Furthermore, tests sponsored by the Library of Congress prove that all paper is at risk of acid decay, because cellulose itself produces formic, acetic, lactic and oxalic acids.
Mechanical pulping yields almost a tonne of pulp per tonne of dry wood used (which is why mechanical pulps are sometimes referred to as "high yield" pulps), which is about twice as much as chemical pulping. Consequently, paper made with mechanical pulps is often cheaper than that made with bleached chemical pulps. Mass-market paperback books and newspapers use these mechanical papers. Book publishers tend to use acid-free paper, made from fully bleached chemical pulps for hardback and trade paperback books.

The future of paper

Some manufacturers have started using a new, significantly more environmentally friendly alternative to expanded plastic packaging made out of paper, known commercially as paperfoam. The packaging has very similar mechanical properties to some expanded plastic packaging, but is biodegradable and can also be recycled with ordinary paper.
With increasing environmental concerns about synthetic coatings (such as PFOA) and the higher prices of hydrocarbon based petrochemicals, there is a focus on zein (corn protein) as a coating for paper in high grease applications such as popcorn bags.
Also, synthetics such as Tyvek and Teslin have been introduced as printing media as a more durable material than paper.

http://www.stationery-direct.co.uk/blog/what-is-a-coated-stock/

What is a coated stock?

Coated Stock Explained

Stock is a term used in the printing industry and refers to the material that is to be printed on, for example, paper, card, vinyl etc.
As the name suggests, coated stock has a coating and this is usually of china clay, this gives the paper/card a smooth surface which can be gloss or silk in finish (gloss being shiny and silk offering more of a matt finish). Coated stock is used for projects that require a high quality finish such as presentation folders, leaflets, flyers and brochures, the list goes on!

Coated stock does have its downsides, it cannot be printed on with a home printer and neither gloss or silk coated stock offer a perfect writing surface, with biro’s tending to smudge on both (especially gloss).
Uncoated stock is typically used for letterheads and compliment slips as they can be printed on at home and written on without problems. A single side coated stock is also available and ideal for postcards and greetings cards, as the name suggests single side coated stock has a coating to one side only, this leaves the other side uncoated and perfect to write on.

TIP: Many printers offer a silk stock for postcards and greetings cards, in the majority of cases this will suffice, however, if you need to hand write on your product then choose a single side coated stock (we offer this as standard).
 
http://www.printoutlet.us/coated-uncoated.php

The Difference Between Coated and Uncoated Stock

Printing Stock is made of bleached wood fibers, fillers, clay and caulk fillings. All papers start out being uncoated in the base preparation of the manufacture of paper. Once the paper is manufactured, it is covered in a white clay or clay and caulk filler material. The coating covers all the small crevices in the stock substrate, making it fairly smooth to feel.
This coating limits the porosity (the measure of the pores of the paper) if paper in its raw form. The limiting of the porosity limits the absorption of liquids into the paper. A coated paper therefore does not absorb the inks printed on it as much as an offset or uncoated stock will. When the inks are not absorbed into the paper, the inks stay on the top of the paper or the coating. Inks being naturally glossy from the oils that are in it become glossier to the eye. As the porosity is reduced on the paper, the higher the gloss level of the inks.
On the application of the coating on the base of the paper, the coating is buffed and polished by calendaring rollers (highly polished chrome cylinders) in the paper making machine. This highly polished surface then becomes glossy itself.
As less inks soak up on coated stocks, less ink is required to gain the same density of the ink color on the sheet compared with the uncoated stock. The images, type and photographs are much sharper on coated stocks.
Coated stocks are not always glossy, and are available in a variety of finishes such as dull, matt or silk finish. These finishes are easier on the eye for reading long type passages. Unfortunately the loss of glossiness on the inks is also the result when these stocks are used. Often designers will specify a varnish on the pictures to gloss them back up when printed of such dull finished stocks.
You can probably guess that one stock has a coating of some kind and that the other paper doesn't. But, what does that mean in terms of your printing job? What should someone be aware of? Here's the difference.
Uncoated papers, due to the fibers of the wood and other fillers are very rough compared to the coated stocks. Uncoated stocks are classified as bonds, offsets, card, newsprint etc. These uncoated papers soak much larger quantities of ink, based on the porousness and the surface area of the uneven finish of the uncoated stock. Uncoated stocks have a tendency to dry faster to the touch, as the ink vehicles (oils in the ink) are absorbed into the porous paper. The inks printed on an uncoated stock are also heavier in volume per square area and are sometimes never dry to a rub resistance. A good example is the yester-year's blotting paper that used to sock up the excess ink from the writing of a quill pen.
Uncoated stocks are easier to write on as the surface accepts the ink more readily than a coated stock. Some writing inks will take several minutes to dry on higher gloss coated stocks, whereas ball point inks will smear even days later. Caution should be exercised if the piece being printed is being used as a piece to be written on.